jakob OTT HSK B - User Manual

ENGLISH 95.600.054.D.E / 2015-08
OTT-JAKOB  +49 (0) 83 64 / 98 21 -0
Spanntechnik GmbH  +49 (0) 83 64 / 98 21 -10
Industriestraße 3 – 7  info@ott-jakob.de
D - 87663 Lengenwang  http://www.ott-jakob.de
Clamping-Unit HSK B
95.600.054.D.E 2015-08
Product Information

Summary

4 Maintenance

4.1 Preventive maintenance schedule

Schedule to ensure the function of the power drawbar.

4.2 Regrease clamping unit

Instructions for regreasing the clamping unit.

4.3 Disassemble clamping unit HSK

Procedure for disassembling the HSK clamping unit.

4.4 Exchange of the lip seal

Procedure for exchanging the lip seal.

4.5 Break of a gripper segment

Action required if a gripper segment breaks.

4.6 Wearing part list

List of wearing parts.

4.6.1 Grease for HSK-calmping unit

List of grease and spray products for HSK clamping units.

4.6.2 O-rings and lip seal parts HSK B

Table of O-rings and lip seal parts for HSK B clamping units.

4.6.3 Repair-clamping-units HSK B-E

Information and order numbers for repair-clamping-units.

4.7 Trouble shooting HSK

Troubleshooting guide for HSK units.

1 Product Description

1.1 Standard

Description of standard HSK forms A, B, E, and F.

1.2 Medium transfer

Explanation of medium transfer types in HSK systems.

1.3 Ceiling speed

Table showing ceiling speeds for different HSK sizes and forms.

1.4 Transferable torque

Table showing transferable torque for HSK sizes and forms.

1.5 Forces at the HSK-clamping unit

1.5.1 Clamped position

Illustration of forces in the clamped position.

1.5.2 Unclamped position

Illustration of forces in the unclamped position.

1.5.3 Diagram

Diagram illustrating forces and stroke in HSK clamping.

1.5.4 Table

Table detailing forces (Fsp, F1 max, FA) for HSK forms.

1.6 Dimension

1.6.1 Clamping Unit

Detailed dimensions of the HSK clamping unit.

1.6.2 Drawbar

Technical drawing and dimensions for the HSK drawbar.

1.6.3 Spindle inside contour HSK form A

Technical drawing and dimensions for HSK form A spindle contour.

ISO;CD 12164-2* clamping unit

Dimensions for HSK clamping units according to ISO/CD 12164-2.

1.6.4 Spindle inside contour HSK form B

Technical drawing and dimensions for HSK form B spindle contour.

E DIN 69063-2 1997-04* clamping unit

Dimensions for HSK clamping units according to E DIN 69063-2.

1.6.5 Spindle inside contour HSK form E

Technical drawing and dimensions for HSK form E spindle contour.

DIN V 69063-5 1996-01 * clamping unit

Dimensions for HSK clamping units according to DIN V 69063-5.

1.6.6 Spindle inside contour HSK form F

Technical drawing and dimensions for HSK form F spindle contour.

DIN V 69063-6 1996-01 * clamping unit

Dimensions for HSK clamping units according to DIN V 69063-6.

1.7 Order number

1.7.1 Assembly tool for HSK clamping unit

Order numbers for assembly tools for HSK clamping units.

1.7.2 Dismounting tool for the spacer HSK B

Order numbers for dismounting tools for HSK B spacer.

2 Assembly

2.1 Clamping unit HSK B

Step-by-step instructions for assembling the HSK B clamping unit.

2.1.1 Check after aprox. 100 tool changes

Procedure for checking the clamping unit after 100 tool changes.

3 Operation

ØG concentricity tolerance

Recommendations for concentricity tolerance and maximum force.

Coolant

jakob OTT HSK B Specifications

General

Brand	jakob
Model	OTT HSK B
Category	Power Tool
Language	English