R35

HEY THERE!

JUST CHARGE IT

WE’RE HERE TO HELP. CONTACT US!

HX-P240

USER GUIDE AND

WARRANTY INFORMATION

You’ve got questions? We’ve got answers.

Contact a Consumer Relations representative by

phone or email to help answer any questions.

Please be sure to have the model number of your

product available. (Hint: It’s HX-P240)

you bought it and how you’re using it is like

gold for the people who make these speakers.

To register, visit:

USA: www.jamaudio.com/customer-support/product-registration

CAN: canada.jamaudio.com/product-registration

Charging the speaker is so easy you’ve probably ﬁgured it out by now, but just in case, you’ve got two options: you can charge it

using your computer or a wall outlet. The JAM Plus needs about 3 hours for up to 6 hours of party time.

The LED lights on your speaker let

you know what it’s doing.

1. The cord that came with the speaker — the

one with the USB on one end and the micro

USB on the other — will work with your

computer.

2. If you want to use the wall outlet, you’ll need

to pick up a power cord with a micro USB the

next time you’re at the store, or use any USB AC

adapter, including the one for your cell phone.

SHED SOME LIGHT

BLUETOOTH

CONNECTION — IT’S A SETUP

Like any amazing couple, this one starts with a connection — one

between your device and the speaker’s Bluetooth. Here’s how it works:

1. Make sure the smartphone, tablet, or computer you’re using with the

speaker has Bluetooth.

2. Turn on the speaker (press and hold the power button for 3 seconds)

and look for the little blinking light.

3. Do whatever your device needs you to do on its end.

USA

cservice@jamaudio.com

1.888.802.0040

8:30am–7:00pm EST M–F

cservice@homedicsgroup.ca

1.888.225.7378

8:30am–5:00pm EST M–F

CANADA

4. Look for JAM Plus in your device’s Bluetooth list or click YES.

5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.

The device and Bluetooth will ﬁnd each other every time, as long as the speaker is set

to Bluetooth and your device’s Bluetooth is, you know, on.

If you’re connecting to a computer, you may have some extra steps on that end. You’ll

have to get that information from the computer company.

Depending on your device, you may be prompted to enter a pairing code. If prompted,

enter “0000” as the code.

To disable pairing of an existing device and pair a new device, press and hold the

PLAY/PAUSE button for 5 seconds to activate pairing mode.

Note: If you turn on your JAM Plus but haven’t started the party yet, it will automatically

power off after 2 minutes of unpaired inactivity.

Note: Once you've paired, if you pause the party for 15 minutes or more, the JAM Plus

will automatically shut off to preserve battery power.

Note: You should never have to do this, but in the event the speaker controls are not

operable, press the reset button to reset the speaker.

Thank you for purchasing

the JAM Plus. Check

out the sections below

for all the important

information about your

new speaker.

Pairing Mode

Bluetooth Light Battery Light

Connected

Charging

Ready to Party

Aux-In Mode

Low Battery

Continued on page 2.

AC adapter not included.

CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER

Bluetooth

Devices

JAM Plus

1. Check out how much juice is in the battery

2. Turn the music down

3. Push it to play, push it again to pause

4. Turn the music up

5. Lets you know when Bluetooth is paired

6. JAM

light shows when two JAM Plus

speakers are paired.

7. Here’s where you hook it up old-school

8. The power cord goes here

9. This is the power button

10. Toggle between languages here

11. Reset

12. Speaker mode switch

Bottom:

Back:

Reset

Jam Plus HX-P240 - Instruction Manual

Other manuals for Jam Plus HX-P240