EasyManua.ls Logo

Jamara CX 2,4 GHz - User Manual

Jamara CX 2,4 GHz
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gebrauchsanleitung
Instructions
Fernsteuerung | Transmitter CX 2,4 GHz
Art.-Nr. | Ord. No.
06 1110 Gas links | Throttle left
06 1104 Gas rechts | Throttle right
DE GB
Frei verwendbar in:
Permittend in:
D, A, E, GB, F, B, DK,
PL, FIN, GR, P, I, CH
Question and Answer IconNeed help?

Do you have a question about the Jamara CX 2,4 GHz and is the answer not in the manual?

Summary

Safety Information

Indemnity Statement

Disposal Instructions

Communications Regulations

Certificate of Conformity

Recommended Accessories

General Description

Technical Specifications

Transmitter Specifications

Details frequency, modulation, voltage, size, weight, and antenna length for the transmitter.

Receiver Specifications

Details frequency, modulation, voltage, size, weight, and range for the receiver.

Transmitter Controls Overview

Controls - Throttle Left Transmitter

Details controls for throttle/rudder stick and trim on the left-hand throttle transmitter.

Controls - Throttle Right Transmitter

Details controls for elevator/aileron stick and trim on the right-hand throttle transmitter.

Receiver Details

Receiver Connections and Output Assignment

Describes receiver sockets and the assignment of channels to functions.

Control Functions and Modes

Control Modes (Mode 1 & Mode 2)

Explains the two different control stick configurations and their channel assignments.

Channel 1: Aileron Function

Details how channel 1 controls the aileron for rolling the model.

Channel 2: Elevator Function

Details how channel 2 controls the elevator for pitching the model.

Advanced Control Functions

Channel 3: Throttle Function

Explains throttle control for engine RPM or cyclic pitch adjustment.

Channel 4: Rudder Function

Details rudder control for yawing or tail rotor adjustment.

Mixing Modes (Delta;V-Tail)

Describes how to activate Delta or V-Tail mixer modes for specific control setups.

Stick and Servo Adjustments

Covers adjusting stick length, servo reverse, and battery compartment access.

Binding the Receiver

Binding Procedure

Step-by-step guide to bond the receiver to the transmitter for communication.

Important Binding Notes

Critical warnings regarding transmitter use in binding mode to prevent damage.

Setting Up Your Model

Initial Setup and Adjustments

Ensures correct servo direction, neutral positions, and trim adjustments for proper operation.

Jamara CX 2,4 GHz Specifications

General IconGeneral
BrandJamara
ModelCX 2, 4 GHz
CategoryTransmitter
LanguageEnglish

Related product manuals