2
1. PEDAL SWITCH
The Pedal Switch is used to start
recording and toggle between
playback and overdubbing. The Pedal
Switch can also be used for tapping
in tempo for a new loop, as well as
undoing and redoing the last overdub.
Pressing the Pedal Switch two times
quickly stops loop playback. This
switch is also used for exiting the
Setup menu and aborting the store
function.
2. STATUS LED
This LED indicates status during
record, playback, and overdub, as
described below.
Solid Red–Record
Flashing Red–Armed for record using Auto
Record
Solid Green–Play
Solid Yellow–Overdub
Flashing Red/Green–Tempo Record Count In
Slave Flashing Red–Armed for record
Slave Flashing Green–Armed for play
3. LOOP LEVEL CONTROL
This knob controls the output level
of the loop.
To Next Page
Loading...
Need help?
General