8
Connecting
The C 803, C 805, C 807 and C 809 speakers comes prepared for bi-wiring.
Please note the following three possible setups.
Single-wiring
For single-wire connections, the terminal jumpers should be attached as shown in
the illustration.
Bi-wiring
If you’d like to use a bi-wiring arrangement, make sure you remove both the termi-
nal jumpers before you connect up your loudspeaker cables like so…
Bi-amping
In a bi-amped system, make sure you remove both the terminal jumpers before
connecting up your cables as shown.
If you choose this option, we recommend you use identical amplifi ers to drive both
the bass and treble units.
AMPLIFIER
AMPLIFIER
AMPLIFIER 1 AMPLIFIER 2
To Next Page
Loading...
Need help?
General
