Need help?Do you have a question about the JAMO E 870 and is the answer not in the manual?
Describes cabinet materials and construction for slimline, floorstander, and small speakers.
Details the 1"/25 mm textile dome tweeter, ferrofluid, and voice coil.
Explains the new unit design, surround, centerplug, and diaphragm.
Advises removing fabric fronts for optimal detail reproduction in high frequencies.
Recommends cable quality and length for optimal sound quality.
Explains single-wiring connection using pre-mounted "bridges".
Details bi-wiring by removing "bridges" and connecting to amplifier terminals.
Describes cabinet materials and construction for slimline, floorstander, and small speakers.
Details the 1"/25 mm textile dome tweeter, ferrofluid, and voice coil.
Explains the new unit design, surround, centerplug, and diaphragm.
Advises removing fabric fronts for optimal detail reproduction in high frequencies.
Recommends cable quality and length for optimal sound quality.
Explains single-wiring connection using pre-mounted "bridges".
Details bi-wiring by removing "bridges" and connecting to amplifier terminals.
General| Woofer | 2 x 178mm (7 inch) |
|---|---|
| Tweeter | 25mm (1 inch) dome |
| Frequency range | 40Hz - 20kHz |
| Type | Floorstanding speaker |
| Crossover Frequency | 2500Hz |
| Impedance | 4 - 8 Ohms |
To Next Page
