Need help?Do you have a question about the JAMO JDA-500 and is the answer not in the manual?
General| Amplifier Class | Class D |
|---|---|
| Rated Output Power 4 Ohms | 500W |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | <0.1% |
| Signal-to-Noise Ratio | >100 dB |
| THD | <0.1% |
| Inputs | RCA, Bluetooth |
| Input Impedance | 10k Ohms |
Explains the status indicators for audio channels.
Details the power status indicator light.
Details unbalanced RCA line input and output connectors.
Covers balanced Phoenix line input and speaker output connectors.
Explains the grounded mains outlet and power switch.
Notes the service port intended for factory use only.
Illustrates connecting balanced audio lines.
Shows how to connect unbalanced audio lines.
Guides speaker connection for 8 or 4 ohm impedance.
Details speaker connection for 70V/100V systems.
Instructions for connecting a laptop via RJ-45.
Steps to access the DSP menu via a web browser.
To Next Page
