Jandy DP3000 - Initial Checks

32 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Model DP Oil-Fired Heater Page 29

NOTES

Table of Contents

Default Chapter1
- Operation Manual1
- Table of Contents2
Section 1.3
General Information 1.1 Introduction3
- Shipping Damage3
- Consumer Information and Safety3
- Spa/Hot Tub Safety Rules3
- Swimming Pool Energy Saving Tips4
- Warranty4
- Codes and Standards4
- Technical Assistance4
- Materials Installer Must Provide4
- Materials for All Applications4
- Materials Fro Special Applications5
- Specifications5
- General Specifications5
- Dimensions5
Section 2.6
Installation Instructions6
- Introduction6
- Field Assembly6
- Location Requirements6
2.3.1 Introduction7
- Clearances7
- Flooring7
- Outdoor Installation8
- Indoor and Outdoor Shelter Installation8
- Installing a Barometric Draft Control8
Section 3.9
Venting9
- Combustion Air Supply9
- Exhaust Venting10
- Outdoor Installations10
- Indoor and Outdoor Shelter Installation10
Section 4.11
Fuel Connection11
- Fuel Supply and Piping11
Section 5.12
Water Connection12
- Water Piping12
- Check Valve Installation12
- Automatic Flow Control13
- Reversible Water Connections13
- Connections at Heater14
- Pressure Relief Valve15
- Auxiliary Components, Chlorinator, Ozone Generators, and Sanitizing Chemicals15
Section 6.16
Electrical16
- General Information16
- Main Power16
- Bonding16
- Auxiliary Time Clock Wiring16
Section 7.17
Operating Instructions17
- Normal Operation17
- Start up18
- Temperature Control19
- Lighting the Heater19
- Setting the Time Clock20
Section 8.21
- Temperature Rise21
Maintenance21
- Water Chemistry21
- Seasonal Care22
- Spring and Fall Operation22
- Winterizing22
- Spring Start-Up23
- Inspection and Service23
- Owner Inspection and Maintenance23
- Professional Inspection and Maintenance24
Section 9.25
Trouble Shooting 9.1 Home Owner Trouble Shooting25
- Oil Burner Does Not Fire25
- Heater Does Not Maintain the Desired Water Temperature25
- Burner Operates, but There Is Smoke or25
  - Pulsating Combustion25
- Pool Water Overheating25
- Professional Troubleshooting Guide25
- Introduction25
- Initial Checks25
- Trouble Shooting26
- Burner will Not Start26
  - Do Not Come On)26
- Burner Tries to Start, but the Primary Control Shuts off (Either Motor or Transformer or both Come On)26
- Oil Burner will Not Shut off27
- Setting the Correct Fuel/Air Mixture27
Section 10.28
9.2.3.5 Control and Cad Cell Trouble Shooting28
- Guide28
Replacement Parts28
- Ordering Information28
- Parts List28
- Exploded View30
- Limited Warranty32

Related product manuals

Preview: Jandy JXi 200

Preview: Jandy Lite2