EasyManua.ls Logo

JANE Balance - H_ ADJUSTING THE INTEGRATED STRAPS; Headrest and Strap Height Adjustment; I_ RECLINING THE SEAT; Seat Adjustments and Removal

JANE Balance
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
EN
H_ ADJUSTING THE INTEGRATED STRAPS
The height of the shoulder straps should be adjusted as the child grows.
With the child sitting correctly in the safety seat check the shoulder straps are
at the right height. They should be just above the child’s shoulders. BALANCE
has 5 shoulder strap positions, when adjusting the height the headrest will move.
To change the height follow the steps below:
Pull the ring found on the back of the headrest (4), this will unlock the position
of the headrest. 4.a
Slide the headrest (3) to the correct position for the child and release the ring.
Move the headrest until you hear it click when locked into place. Pull the headrest to make sure it is secure. 4.b
WARNING:
Adjust the height as the child grows.
I_ RECLINING THE SEAT
The BALANCE safety seat can be reclined using a lever on the front part of the seat (10). It has 4 positions.
To recline the seat, pull the lever and slide the seat to the required position. 5
J_ REMOVING THE SEAT FROM THE VEHICLE
Loosen the tension of the ISOfix anchors by turning the handle (9). 6.a
Release the ISOfix anchors by pressing both unlocking buttons (7). The signals on the side (8) will turn red. 6.b
Remove the safety seat. You can store the ISOfix anchors inside the base by turning the handle (9) and fold the leg.

Table of Contents

Related product manuals