JANE CROSSLIGHT - Fitting and Removing the Seat; Pro-Fix System

17
EN
F. PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system, ready for
you to attach the JANÉ accessories available on the market (KOOS,
MICRO, MATRIX or NEST), tted with the PRO-FIX connectors suitable
for the CROSSLIGHT model.
The PRO-FIX system makes it easy to attach and remove these acces-
sories to and from the chassis, with a quick, simple and safe operation,
that anchors them securely to the chassis. To do this follow the ins-
tructions for each accessory carefully.
WARNING: Before using this product, always make sure that the
locking devices of the accessories are correctly engaged by
pulling the accessory upwards
G. FITTING AND REMOVING THE SEAT
With the PRO-FIX system the seat can be tted facing you (rear facing
position)
9
a when the child is very small or facing outwards (forward
facing position) as the child grows.
9
b
To do this, connect the seat from above and t it onto the PRO-FIX
connectors on the chassis, until you hear it CLICK into place.
9
c
WARNING: Put the parking brake on when tting or removing
the seat.
WARNING: Make sure that the seat is securely anchored to the
chassis by gently pulling it upwards.
WARNING: Never take the seat off the CROSSLIGHT chassis while
the child is still sitting in it.
To take the seat off the chassis, simultaneously press the unlocking
levers found on both sides of the seat and pull it upwards.
10
WARNING: Use the seat belts whenever the child is sitting or
lying in the seat.
!
!
!
!
!
IM 2237,00 CROSSLIGHT_print.indd 17 22/10/20 14:27