JANE DRIVE - Installing the Seat in the Car

43
EN
!
on rear seats.
There are four possible installation options:
Depending on the vehicle you have, and the child’s height
range, the following installations may be selected:
* If your vehicle is not i-Size ready, check the compatibility list
NOTE: Raise or remove the vehicle seat headrest if it interfe-
res with the safety seat headrest, so the backrest is secured
rmly against the vehicle seat. On seats with a frontal airbag,
move the vehicle seat as far back as possible.
F. INSTALLING THE SEAT IN THE CAR
Before tting the booster seat with the ISOFIX anchors, make
sure that the selected vehicle seat is equipped with ISOFIX
anchors and that your car is on the list of compatible ve-
hicles.
Main use options:
Integral harness + Isox + TT
Vehicle seat belt (optionally with
Isox)
Vehicle seat belt (optionally with
Isox and TT)
Vehicle seat belt (optionally with
ISOFIX and TT)
i-Size seat (75-105 cm)*
i-Size seat (100-125 cm)*
For all other vehicles (100-
125 cm)
For all other vehicles (125-
150 cm)