EasyManua.ls Logo

JANE Trider - Harness, Footrest, and Brake Systems; Seat Belt Operation; Footrest and Parking Brake Operation; Suspension Strength Adjustment

JANE Trider
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
english
To lock the front wheel, press the button found behind the
front wheel bearer. 20
13.- FRONT WHEEL LOCK
The footrest can be adjusted to 5 different positions. Use
your thumb to simultaneously press the two buttons on the
lower part of the hammock. 16
10.- ADJUSTING THE FOOTREST
PUTTING THE BRAKE ON: Push the lever downwards. 17
TAKING THE BRAKE OFF: Pull the lever upwards. 17.a
11.- USING THE PARKING BRAKE
12.- ADJUSTING THE STRENGTH OF THE SUSPENSION
To increase the strength turn the lever clockwise. 19
To reduce it turn the lever anti-clockwise. 19.a
WARNING: When the brake is on make sure that the push-
chair has braked correctly. It may be necessary to push the
pushchair slightly for the brake to be fully activated.
To adjust the brake:
If you need a more precise adjustment follow the indications
in figure. 18
9.- SEAT BELT
Your pushchair has a safety harness to keep your child safe at
all times. Fit the belt onto the child whenever he is using the
pushchair. 15
15a. To open the belts, press the button in the middle of the
harness.
15b-c. To fasten it, bring the two side straps together and
then insert them into the harness until they click into place.
15d. Adjust the belts so that they t the child correctly with
the right tension. To adjust the length of the belts, slide the
buckles up or down. Make sure that the belts are not twisted.

Table of Contents

Other manuals for JANE Trider

Related product manuals