janitza 800 Series - Page 5

www.janitza.com
5
800-CT24 module
5. Connections/controls 24
6. Module markings – rating plate
25
7. Installation
26
7.1 Current measurement with the module
26
7.2 Startup procedure/initialization
26
7.3 Connection diagram "Current measurement" for 1st 800-CT24module
27
7.4 Module identification / Diagnostics on the basic device
28
7.4.1 Entry "Identify one module”
29
7.4.2 Entry “Identify all modules”
29
7.4.3 Module identification - LED blink interval
30
8. Module communication / PC connection
32
8.1 Ethernet communication via basic device
32
8.1.1 Connection example 1
32
8.1.2 Connection example 2
33
8.1.3 Connection example 3
34
8.2 Module communication options
35
8.2.1 Module handling in the GridVis
®
software 35
8.2.2 Basic device homepage
35
8.2.3 Module handling via a user interface (HMI)
35
9. Operation and button functions of the basic device with module
36
9.1 Operation and button functions of the basic device with 800-CT24 module
36
9.2 Module-relevant menu items of the basic device with 3 modules of the type 800-CT24
36
10. Module-relevant configurations
40
10.1 LP current transformer configuration on the basic device
40
10.2 LP current transformer configuration in the GridVis
®
software: 41
10.3 LP current transformer configuration via the device homepage of the basic device
42
11. Module-relevant measuring displays of the basic device with 3 modules
of the type 800-CT24
44
12. Device views
52