6
English
Read before use
Montage
Carefully read the warning and safety precaution.
Check the product for any visible damage. If any, contact japproducts as soon as possible.
Before using this appliance please assemble it following the instructions below step by step.
1. Align the mounting base parts with the corresponding holes and insert the posts into the
holes. (Fig 2.A)
2. Connect the assembled base parts to the bottom part of the fan and use the 4 screws
provided to screw the base to the main body. (Fig 2.B)
3. Place the fan on a stable and level surface and route the power cord through the large
recess in the base part. (Fig 2.C)
g. 2A
g. 2C
g. 2B
To Next Page
Loading...
