Jari Monarch User Manual

CAUTION
Never attempt to work on your Jari Mower without rst removing the spark plug or wire from spark plug. Never
wear loose clothing near the unit when the engine is operating. Before starting the engine, clear the area of adults,
children and pets. A sudden gust of wind and/or an unexpected move on somebody’s part can change what was a safe
situation. Always exercise caution during the operation, handling, parking or storage of your mower. Shutting off and
allowing engine to cool is necessary before refueling. Stop engine before attempting to clean any debris from knife assembly.
MONARCH
MODEL C REPAIR PARTS LIST AND OWNERS MANUAL
Serial No. 93878 and later
LUBRICATION (5 Zerks)
Use heavy-duty gun grease every 3 hours of operation. If one grease retainer, such as item #39 used in conjunction with
part requiring grease, grease until grease appears at the retainer. If two grease retainers are used, such as with each
wheel or dual pulley #59, grease until grease appears at both retainers. It is not necessary to remove fender for greasing.
Drive shaft has sealed ball bearings, which do not require greasing.
Jari Serial Number: (located on frame under engine)
Date Purchased:
Engine (2 numbers located on engine in form of decal and/or
stamped into ywheel housing)
Make: H.P.:
Jari Mowers, LLC
54456 Gadwall Rd.
Mankato, MN 56001
Phone: 507-625-3340
Fax: 507-388-3973
Email: info@jarimowers.com
www.jarimowers.com

Jari Monarch Specifications

General

Brand	Jari
Model	Monarch
Category	Lawn Mower
Language	English

Summary

Safety and Handling

General Cautionary Notes

Essential safety warnings for operating, handling, and maintaining the mower.

Maintenance and Lubrication

Lubrication Procedures

Guide to greasing points, frequency, and type of grease required.

Belt Maintenance and Replacement

Instructions for tightening, adjusting, and replacing mower belts.

Winter Storage Preparation

Steps for storing the mower during the off-season, including fuel treatment.

Assembly and Operation

Mower Assembly Steps

Detailed instructions for putting the Jari Monarch mower together.

Engine Starting Procedure

How to safely start the mower's engine.

Operating Levers and Controls

Explanation of the function and use of various control levers.

Mowing Speed and Techniques

Tips for adjusting speed and best practices for mowing different terrains.

Troubleshooting

Cutting Performance Issues

Diagnosing and fixing problems like stalling, dull blades, or loose knife clips.

Mechanical and Belt Problems

Addressing issues like broken screws, belt slippage, or binding.

Power and Operational Faults

Solutions for lack of power, loose sickle bar action, or other operational faults.