Jarol JAC300-2R2GB-4-5013 - User Manual

JAC300 Series Inverter User Manual
- 1 -
Foreword
First of all, thank you for purchasing the JAC300 series inverter!
The JAC300 series inverter is a high performance vector inverter
designed to drive asynchronous motors. It can be used for driving of
packaging, food, fans, pumps and various automated production
equipment.
This manual introduces the functional characteristics and usage
methods of JAC300 series inverters, including product selection,
parameter setting, operation debugging, maintenance inspection, etc.
Please read this manual carefully before use. Equipment manufacturers
please send this manual with the equipment. End users, convenient for
subsequent reference.
Precautions
♦ To illustrate the details of the product, the illustrations in this
manual are sometimes in the state of removing the cover or safety
cover. When using this product, be sure to install the cover or cover
as required and follow the instructions in the manual.
♦ The illustrations in this manual are for illustrative purposes only and
may differ from the products you ordered.
♦ The company is committed to continuous improvement of products,
product features will continue to upgrade, and the information
provided is subject to change without notice.
♦If you have any problems in use, please contact our regional agents
or directly contact our customer service center. Customer Service
Phone: 400-680-9991
Unpacking inspection:
When unpacking, please confirm carefully:

Summary

Chapter 1 Safety Information and Precautions

1.1 Safety Precautions

Critical safety guidelines covering installation, operation, and maintenance.

Chapter 3 Installation Instructions

3.1 Mechanical Installation

Details on physical mounting, environmental requirements, and orientation.

3.2 Electrical Installation

Guides for wiring main circuits, control terminals, and diagrams.

Chapter 4 Operation Display

Chapter 5 Function Parameter List

P0 Basic Function Group

Covers fundamental settings like motor control method and frequency sources.

P1 First Motor Unit Parameters

P3 V;F Control Parameter

P4 Group Input Terminal

PA Group PID Control Parameters

PD Group Communication Parameters

Chapter 7 Maintenance and Troubleshooting

7.1 Daily Maintenance and Maintenance of the Inverter

Routine checks, cleaning, and part replacement advice.

7.2 Fault Alarm and Countermeasure

Lists common fault codes, their causes, and troubleshooting steps.

Appendix C Modbus Communication Protocol

Jarol JAC300-2R2GB-4-5013 Specifications