Jarvis JC III User Manual

JC III
Complete
Blade
Set
Blade
Diameter
Operating
Pressure
4034019 3023004 100 mm 90 PSI
4034020 3023011 110 mm 90 PSI
4034021 3023004 100 mm 45 PSI
4034022 3023011 110 mm 45 PSI
TABLE OF CONTENTS Page. . . . . . . . . . . . . . . . .
Air Hose (with connectors) 1059002. . . . .
Suspension Bracket 1042028. . . . . . . . . .
Air Filter/Lubricator
Regulator 3022003.
. . . . . . . . . . . . . . . . . .
•Notice to Employer and Safety
Director 2. . . . . . . . . . . . . . . . . . . . . . . . .
•Notice to Operators, Maintenance
and Cleanup Personnel 3. . . . . . . . . . . .
•Parts Diagram & List 4. . . . . . . . . . . . . .
•Specifications 6 . . . . . . . . . . . . . . . . . . . .
•Installation Instructions 6. . . . . . . . . . . .
•Operation Instructions 6. . . . . . . . . . . . .
•Maintenance Instructions 7. . . . . . . . . .
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLET OWN, CONNECTICUT 06457-4926
UNITED ST A TES OF AMERICA
TEL. 203-347-7271 F AX. 203-347-6978
6234007::
Model JC III
Air Powered Dehider
EQUIPMENT SELECTION


Jarvis JC III Specifications

General

Brand	Jarvis
Model	JC III
Category	Cutter
Language	English

Summary

Notice to Employer and Safety Director

Employer Responsibilities for Safe Operation

Key duties for employers to ensure safe tool operation and prevent injuries.

Notice to Operators, Maintenance and Cleanup Personnel

Operator Safety and Handling Procedures

Essential safety guidelines for operating, maintaining, and cleaning the dehyder.

Parts Diagram and List

Component Identification and Part Numbers

Visual representation and list of all parts for the JC III dehyder.

Specifications

Technical Specifications of the JC III Dehyder

Detailed technical data including motor power, operating pressure, and dimensions.

Installation Instructions

Air Connection Requirements

Details on compressed air supply pressure and CFM needed for the dehyder.

Air Filter and Lubricator Installation

Instructions for installing and maintaining the air filter/regulator/lubricator.

Operation Instructions

Pre-Operation Checks and Procedures

Daily checks including trigger function, air supply, and lubrication.

Maintenance Instructions

Daily and Shift-Based Greasing

Procedure for greasing specific fittings three times per shift.

Daily Lubrication and Blade Care

Flushing air motor, cleaning and sharpening blades.

Disassembly and Assembly Procedures

Gear and Shaft Disassembly

Step-by-step guide for taking apart the gear and shaft assembly.

Gear and Shaft Assembly

Instructions for reassembling the gear and shaft components.

Air Motor Disassembly

Procedure for removing components of the air motor.

Air Motor Assembly

Steps for reassembling the air motor with packed bearings.