JASHEN S18X - Troubleshotting Guide; Specification

SPECIFICATION
TROUBLESHOTTING GUIDE
WARNING: 

Problem
Possible cause Remedies
The appliance
doesn’t work
Hepa cleaning
indicator blinking
Brush Roller/So
Roller does not spin
Weak
sucon power
Abnormal
motor sounds
Baery won't charge
Charging too slow
No power
AUTO protecon for overheated
The sucon mouth is blocked
Dustcup and filters are need cleaning
Brushroll light flashs, indicate floor
head blockage
Roller auto protecon for overheated
Connecon issue between the handheld
vacuum, wand, and nozzle
The pre-filter is not installed
The appliance is blocked(such as tube,
sucon mouth or some other parts)
The brush roller is wrapped by hairs
or fibers
The appliance is blocked(such as tube,
sucon mouth or some other parts)
The adaptor is not correctly inserted
Poor contact of the main body or baery
Wrong charger being used
Temperatures outside of
the specified range
Charge the baery according to
instrucions
Turn off appliance, Restart aer cooling
Check and remove blockages
Empty dust cup and clean filters
Turn off appliance and remove
blockage of floor head
Turn off appliance ,Restart aer cooling
Disconnecng and rub the juncon
point with a so cloth, reaaching
the pieces
Install the pre-filter
Clear blockages
Clean the brush roller
Clear blockages
Reinsert the adaptor correctly
Check if the main body and
baery are correctly placed
Use the original Jashen I type adaptor
Charge the baery when the
terperature above 50°F (10°C)
and below 100°F (38°C)
In any other case or if the soluon explained above did not solve the problem, please contact us
at support@jashen-tech.com





Charging Output




4 hrs

 
WARNING: The above data is from the JASHEN laboratory, the actual situaon may vary
according to the use environment.
Disposal
• The baery contains materials that are harmful to the environment and must be removed
from the appliance before it is discarded.
• When removing the baery, the appliance must be powered off.
• Waste baeries should be handled properly. Do not put them into fire, water or soil.
• If the baery leakage touches the skin or clothing, flush with water immediately to avoid skin
injury and seek medical help.
14 www.jashen-tech.com
support@jashen-tech.com 15