Seat
9. Motor Drive
Assembly and
11. Electrical Cables
Check that the frame and fork are not bent or broken.
Ensure hub motor is spinning smoothly and motor bearings are in good working order.
Ensure all power cables running to hub motor are secured and undamaged.
washers are in place.
Let bike dry completely before using again.
Look over connectors to make sure they are fully seated and free from debris or moisture.
Check cables and cable housing for obvious signs of damage.
12. Accessories
Inspect helmet and other safety gear for signs of damage.
Ensure there are no cracks or holes in fenders.
removed before every ride.
that your bike remains safe and fun to ride.
Safety Check
Tire Inflation and Replacement
visit www.jasionride.com or contact Jasion Support Team.
Email: support@jasionbike.com
the rim. Failure to remove all air pressure from the inner tube could result in serious injury.
striping.
27
28
To Next Page
Loading...
