Assembly
the pedal. Your leg should be almost fully extended(not locked out) with a slight bend at the knee.
2.Move the seat up and down by sliding the seat post
in or out of the seat tube. DO NOT raise the seat post
the seat post tube.
lever open and outward fully.
3.Adujst the seat and the head of the seat is
parallel with the top tube.
Assembly
by Allen wrench.
4.Check the chain alignment. Rotate the right pedal and
crank toward the back of the bike as though pedaling
backward. Watch the chain and ensure the chain runs
around the front chainring) smoothly.
Note: If the pedal/ chain doesn't run smoothly or something seems misaligned, please contact Jasion Support Team.
9
10
To Next Page
Loading...
