Jasper Connect User Manual

Installation Instructions
Unit Assembly
Recommended Tools
Package Contents
Step 1
Attach the legs to the bottom of the uphol-
stered unit using 1 inch long large wood
screws. The base will have pilot holes to locate
the screws.
Page 1 of 2CONNECT
Legs
Upholstered Unit
1-1/4
”
Wood Screw
1
”
Zinc Wood Screw
Hardware Used
Linking Hook & Latch
1” Long Screws
#2 & #3 Phillips Head Bits
#2 & #3 Phillips Screw Drivers
Screw Gun
Notice To Installers: Failure to comply with installation instructions will compromise the safety, durability and performance of this product, which may risk injury to the user of this
product and/or diminish the product life cycle. Jasper Group assumes no liability in these instances.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546
Form No. INST-CT001
5/1/16

Jasper Connect Specifications

General

Brand	Jasper
Model	Connect
Category	Indoor Furnishing
Language	English

Summary

Unit Assembly

Step 1: Attach Legs to Upholstered Unit

Attach legs to the bottom of the upholstered unit using 1-inch large wood screws.

Step 2: Connect Linking Latches and Hooks

Attach linking latches and hooks using 1-1/4" long black wood screws.

Step 3: Assemble 3-Piece Media Group

Center section has latches/hooks, right unit has latches, left unit has hooks.

Step 4: Level Units and Ensure Flush Bases

Ensure units are level, bases are flush, and there are no gaps between headrests.