Need help?Do you have a question about the JAT ECOSTEP 54 and is the answer not in the manual?
General| Efficiency | >85% |
|---|---|
| Operating Temperature | 0°C - 40°C |
| Type | Class D |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 10kΩ |
| Inputs | XLR, RCA |
| Outputs | Speaker Binding Posts |
| Frequency Range | 50/60Hz |
| Protection | Short Circuit |
Details hazards associated with high voltages and precautions to avoid electric shock.
Warns about risks from hot device surfaces and recommended safety measures.
Highlights dangers of unexpected axis movements and necessary safety precautions.
Emphasizes safety during installation, grounding, and UL environment considerations.
Details pin assignment and functionality of the 24V digital outputs and holding brake connections.
Explains the pin configuration and purpose of the digital inputs, including limit switches.
Describes the pin assignment for motor connections, including brake and limit switch inputs.
Details the pin configuration for power supply, logic supply, and DC link control.
Highlights safety checks, personnel qualifications, and initial checks before starting commissioning.
Details the step-by-step process for installation check, power supply, software setup, and connection.
Details how to adjust device parameters for specific applications and prevent damage.
Configuration of maximum current, holding current, resolution, and velocity settings.
Sets the 'Enable Operation' bit to prepare the drive for further commands.
Details how to perform the homing procedure for the axes.
Allows selection between Positioning Mode and Velocity Mode for axis control.
To Next Page