EasyManua.ls Logo

Jata electro PL622C - Additional Safety Warnings; Liquid Immersion Hazard; Initial Use Observations; Residual Water Explanation

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Do not use the appliance if it has been dropped, if there are
visible sings of damage or if it is leaking.
When placing the appliance on it stand, ensure that the surface
on which the stand is placed stable.
Avoid any contact between the cable and the hot parts of the
iron.
To ll the water tank “UNPLUG” the appliance from the mains.
Do not pour any decalcication products or other chemicals in
the tank. Only water.
Do not leave the appliance unattended while connected to the
mains.
Avoid any contact with the hot parts of the appliance while in
use and when cooling.
When you have nished ironing, always empty the water from
the iron.
Don’t allow children play with the appliance. Keep the
appliance out of the reach of children.
When connected to the mains or cooling down, hold the steam
iron and the cable cord out of the reach of children under 8
years old.
VERY IMPORTANT: Never immerse the appliance in water or
any other liquid.
You may get some smoke and/or smells during the rst few
uses. This is completely normal in this kind of appliances.
During the rst use it is possible that the products used in the
manufacturing process of the appliance may contaminate the
steam. We recommend that you allow the steam to ow for a
few minutes before starting to iron.
It there still rests of water in the tank, it is due to the quality
controls made in our production line.

Related product manuals