Java wsd18-060 - Time and Automatic Operation Settings

13
DISPLAY:TIME
⑷NowpresstheRotarySwitch(1)tostartprogramming
thetime.
DISPLAY:‐‐:‐‐
⑸TurntheRotarySwitch(1)toadjustthehours..
DISPLAY:12:‐‐
⑹PresstheRotarySwitch(1)toconfirmthehoursettings
andtoactivatetheminutes.
DISPLAY:12:‐‐
⑺TurntheRotarySwitch
(1)toselecttheminutes.
DISPLAY:4:05
⑻Toconfirmthenewsettings,presstheRotarySwitch(1).
DISPLAY:TIME
⑼Presstheprogrammingkey(4)toquitthe
programmingmodeorselectthenextprogramming
itemusingtheRotarySwitch(1).
DISPLAY:READY
 Ifthemachineisdisconnected
frompowersupply,the
timemustbeprogrammedagain.

15.6  Programmingtheautomaticswitch‐ontime
¾ Youmustprogrammethetime(Chapter15.5)ifyou
wanttousetheautomaticswitch‐onfunction.
⑴DISPLAY:READY
⑵Pressprogrammingkey(4)untilFILTERappears.
TheprogramLED(23)andthe
illuminatedring(2)is
active.
⑶TurntheRotarySwitch(1)untilMACHINEONis
displayed.
DISPLAY:UNITON
⑷NowpresstheRotarySwitch(1)tostartprogramming
theswitch‐ontime.
DISPLAY:‐‐:‐‐
⑸TurntheRotarySwitch(1)toadjustthehours.
DISPLAY:12:‐‐
⑹Pressthe
RotarySwitch(1)toconfirmthehoursettings
andtoactivatetheminutes.
DISPLAY:12:‐‐
⑺TurntheRotarySwitch(1)toselecttheminutes.
DISPLAY:12:45
⑻Toconfirmthenewswitch‐ontime,presstheRotary
Switch(1).
DISPLAY:UNITON
⑼Presstheprogrammingkey(4)toquit
the
programmingmodeorselectthenextprogramming
itemusingtheRotarySwitch(1).
DISPLAY:READY

15.7  Programmingtheautomaticswitch‐offtime
¾ Youmustprogrammethetime(Chapter15.5)ifyou
wanttousetheautomaticswitch‐offfunction.
⑴DISPLAY:READY
⑵Pressprogrammingkey(4)
untilFILTERappears.
TheprogramLED(23)andtheilluminatedring(2)is