Need help?Do you have a question about the Javelin J330i and is the answer not in the manual?
General| Power Requirements | 100-240V AC, 50/60Hz |
|---|---|
| Card Capacity | 100 cards |
| Connectivity | USB |
| Supported Card Types | PVC |
| Supported Media Types | PVC |
| Humidity | 20% to 80% non-condensing |
Steps to unpack the printer and verify included items.
Instructions for installing the card cleaning cartridge.
Guide on how to load the printer ribbon.
Instructions for loading plastic cards into the printer feeder.
How to adjust the card thickness control for proper feeding.
Initial steps to begin printing, including driver setup.
Detailed steps and checks for safely unpacking the printer.
Step-by-step instructions for installing a new ribbon.
Guide on how to correctly install the cleaning cartridge.
Instructions for adjusting the card thickness for optimal feeding.
Procedures for loading plastic cards into the feeder.
Guide to installing printer drivers and configuring options.
Specific steps for installing the printer driver using the wizard.
Instructions for establishing a connection between the printer and PC.
Steps for connecting the printer to a power source.
How to print a test card to verify printer functionality.
How to configure printer settings for optimal output.
Guide to designing and printing a sample card.
Important warnings and guidelines to protect the printer's warranty during cleaning.
Step-by-step instructions for performing a standard printer cleaning.
Detailed method for cleaning the printer's sensitive printhead.
Diagnosing and resolving problems affecting print quality.
Steps to resolve issues with the printer's Ethernet connectivity.
To Next Page