Javo Standard potting machine manual
Version 2010-11-1 Page 15
Attachments
Name and address of the manufacturer and/or dealer
Manufacturer:
Javo BV
Westeinde 4, 2211 XP
PO Box 21, 2210 AA
Noordwijkerhout
The Netherlands
Symbols and information on the machine
Type plate
The CE-mark is shown on the type plate attached to the control cabinet door. This plate contains the following
information:
A. Machine type
B. Unique machine serial number (CE number)
C. Year of manufacture
D. Motor
E. Voltage
F. Maximum power consumption
G. Number of phases
H. Cycles / Hertz
Safety symbols
The symbols below show the emergency stops and the safety signs on the machine with references to the potential
hazards.
Read and understand this manual before:
- starting the machine Hazard: injury from moving parts
- performing maintenance.
Hazard: injury from pinching parts.
3 emergency stops: Hazard: injury from electric shocks
on the switch panels on either side of
the machine and on the cover of the control cabinet
on the front.
No access
To Next Page
Loading...