Jawbone JBE User Manual

Jawbone JBE User Guide :: 8.3.2010
Image needs highlighted in yellow
CONTENTS
JBE Anatomy
Power Up
1. Get Connected
2. Get Listening (I’m slim on content for this proposed section)
3. Get Talking
4. Get Apps & More
Troubleshooting
Specifications
Safety Information
JBE ANATOMY
Image of JBE (2 are probably required: top & side perspectives)
• Micro USB (for charging/power)
• On/Off & Pairing Switch
• Audio Input (3.5mm stereo mini-jack)
• LED Ring (is it a ring?)
• Volume Buttons
• TALK Button
• Built-in Microphone
If the LED Ring is…
Flashing White: Jawbone is trying to connect to your phone or Bluetooth® device.
Flashing Red: Battery is low. Power up!
Flashing Red + White: Jawbone is in pairing mode and ready to connect to your
phone or Bluetooth® device. Go to your phone’s Bluetooth settings to connect.
POWER UP
Your Jawbone JBE is partially charged and ready to use right out of the box.
Image that shows device being plugged in and powered via USB
For a Full Charge: Plug it into your wall charger or a USB port on your computer.
To Hear Remaining Battery Life: Press the TALK BUTTON when not on a call.
When Battery Is Low: The LED RING flashes RED.
When Fully Charge: The LED RING turns WHITE.
Note: A full charge takes 3 hours and results in up to 5 hours of listening time.
1. GET CONNECTED

Jawbone JBE Specifications

General

Brand	Jawbone
Model	JBE
Category	Speakers
Connectivity	Bluetooth
Battery Life	Up to 10 hours
Weight	0.5 lbs

Summary

JBE Anatomy and Components

JBE Anatomy Overview

Details the physical parts of the Jawbone JBE headset, including ports and controls.

LED Ring Indicators

Explains the meaning of different LED Ring colors and patterns for status indication.

Powering and Charging the Jawbone JBE

Initial Power Up

Information on the device's initial charge status and readiness for use.

Full Charge Procedure

Instructions for fully charging the device via USB or wall charger, and expected battery life.

Getting Connected

Plug and Play Audio

Connecting the Jawbone JBE via USB or 3.5mm audio jack for playback.

Wireless Bluetooth Pairing

Steps to prepare Jawbone JBE and your device for Bluetooth connection.

Making the Bluetooth Connection

Guide to finding and connecting the Jawbone JBE through device Bluetooth settings.

Getting Listening

Adjusting Volume

Guidance on adjusting audio volume during music playback or calls.

Getting Talking

Troubleshooting Common Issues

Hearing Distortion

Solutions for audio distortion, including volume adjustment and battery check.

Low Volume

Tips to improve audio volume, such as checking player volume and charge status.

Bluetooth Pairing Problems

Troubleshooting steps for issues when pairing the device with Bluetooth devices.

Signal Loss or Dropouts

Advice for resolving intermittent Bluetooth signal issues and ensuring device compatibility.

Specifications and Safety

Device Specifications

Technical details including battery life, power, output, frequency response, and range.

FCC Compliance Statement

Information regarding FCC rules, interference, and user guidance for compliance.

IC RSS-GEN Compliance

Statement of compliance with Industry Canada's radio standards for device operation.