EasyManuals Logo

Jaybird freedom Faq

Jaybird freedom
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
[PDF] How Do I Pair My Jaybird Freedom To A New Phone Of 2022 - Wiki FAQ
1
How Do I Pair My Jaybird Freedom To A
New Phone Of 2022 - Wiki FAQ
[PDF] Update: 19 Oct 2022.
How do I reset my Jaybird Vista earbuds "With your headphones turned off press and hold the Power
Button until you see the LED flashing red/green. When the LED flashes red/green the headphones are ready
to pair. A voice prompt will say Searching for your music device. Select Jaybird FREEDOM in the list of
discovered devices to connect. ".
How do I reset my Jaybird Vista earbuds?
How do I connect my left Jaybird RUN "Complete a factory reset of your earbuds Press and hold the case
button until the case LED starts blinking white. While the charge case LED is blinking white press the case
button twice. The LED will blink pink and you can now close the case. When you open the case your earbuds
are reset and ready to pair. ".
How do you pair earbuds without button?
How do I connect Soundmates to my iPhone "No physical button To connect you must go to the Bluetooth
settings on your phone and start it scanning. Quickly take one earpiece from the case then the other. If your
phone is scanning there will be a very short time when they will show up for pairing. ".
How do I set up my Jaybird X3?
Why won't my Jaybird X3 headphones connect.
How do I reset my Jaybird XT?
How do I reset my Jaybird RUN earbuds "Push and hold the multi- function button on the right bud
for about 6 seconds until you see the LED flash green;
Now press the button twice;
Upon successful factory reset the LED will turn orange and your buds will turn off;
Once your buds have been reset they will automatically go into pairing mode once powered on;
How do I reset my Jaybird RUN earbuds?
Why is my Jaybird not connecting "With your right earbud off press and hold
the right multifunction button for 6 seconds until the LED flashes green. Double
press the right multifunction button. The LED will flash orange and the earbud will
turn off. Your earbud has now been reset. ".

Other manuals for Jaybird freedom

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jaybird freedom and is the answer not in the manual?

Jaybird freedom Specifications

General IconGeneral
Impedance16 Ω
Driver unit6 mm
Ear couplingIntraaural
Headphone frequency20 - 20000 Hz
Maximum input power10 mW
Headphone sensitivity96 dB
Total Harmonic Distortion (THD)3 %
Microphone sensitivity38 dB
Carrying caseYes
Cables includedUSB
Battery typeBuilt-in battery
Standby time110 h
Battery capacity60 mAh
Battery recharge time2.5 h
Continuous audio playback time8 h
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP, SPP
Connectivity technologyWireless
Headset typeBinaural
Product typeHeadset
Product colorGray
Wearing styleIn-ear
Operating keysPlay/pause, Track \u003C, Track >, Volume +, Volume -
Volume controlDigital
Brand compatibilityApple
Weight and Dimensions IconWeight and Dimensions
Depth6.2 mm
Width23.4 mm
Height22.4 mm
Weight16.15 g

Related product manuals