Jaybird X2 User Manual

28
PAIRING (SETTING UP) HEADPHONES WITH
YOUR PHONE / MUSIC DEVICE
1. With headphones turned off, & within 1 meter (3 feet) of music device, press & hold center
key for more than 4 seconds until you see alternating red/green flashing of the status
indicator and a voice prompt saying “Searching for your music device”.
2. On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices (see
instructions in the phone/music device manual for details).
3. Check for “X2” and select (enter passcode 0000 if prompted).
4. X2 voice prompt will say “headphones connected”.
5. If the pairing is not successful, switch off headphones by pushing the center key for more
than 4 seconds and repeat the steps outlined above.

Jaybird X2 Specifications

General

Impedance	16 Ω
Driver unit	6 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Maximum input power	12 mW
Headphone sensitivity	103 dB
Intraaural headphones type	Earbuds
Total Harmonic Distortion (THD)	5 %
Microphone sensitivity	-38 dB
Microphone direction type	Omnidirectional
Cables included	USB
Standby time	250 h
Battery capacity	100 mAh
Battery recharge time	2.5 h
Continuous audio playback time	8 h
Cable length	0.54 m
Headset type	Binaural
Product type	Headset
Product color	Black, Blue
Wearing style	In-ear
Operating keys	Play/pause, Track \u003C, Track >, Volume +, Volume -
Volume control	Digital
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Buttons quantity	3
Number of products included	1 pc(s)

Weight and Dimensions

Depth	13 mm
Width	22 mm
Height	29 mm
Weight	13.8 g