Caution:
1. Once using E-SATA interface, it can only recognize one HDD
in PC. If 2 HDDs are inserted in the dock, it can only recognize
Bay ‘A’ HDD. If only insert one HDD in the dock, both Bay’A’ and
Bay ’B’ can be recognized.
Function：
• Complies with Gen2i/Gen2m of Serial ATA II Electrical
Specification 2.6
• Supports SATA II Asynchronous Signal Recovery (Hot Plug)
feature
• Supports SATA to SATA pass through
• Complies with USB 3.0 Specification, USB Mass Storage
Class, Bulk-Only Transport Specification
• Supports USB Super-Speed/High-Speed/Full-Speed Operation
• Supports USB HID operation
• Supports USB2.0/USB3.0/eSATA power saving mode
• Supports Dual LUN for USB2.0/USB3.0
• One Touch Backup
• Easy to Install and Set-up
• Supports clone function
• Design for Win2000, WinXP, WinVista, Win7, MAC 9.2 or
later version.
To Next Page
Loading...