SECTION 12-INTERIOR JAYCO TOWABLE TABLE OF CONTENTS
12-6
Ensure the heated bed mats are on the bed board with the label and connector pointed
up.
The cord should be at the head of the bed.
Do not tuck in the wired area of the heated bed mats.
Let the cord hang free. Do not route electrical cords between the heated bed mats and
the bed boards. Do not allow the cords to be pinched. NEVER pull a heated bed mat
by its cord.
Keep the heated bed mat control away from an open window.
Do not use pins or any heavy, sharp pointed objects on the heated bed mats. They
may damage the heating elements.
Be sure the heated bed mats are used on a 120 volt AC circuit.
Turn off the electric current when this bedding is not in actual use.
Maintenance
Unplug the bed mats first. Wipe gently or blot the soiled area, using a damp cloth treated
with a mild detergent. DO NOT IMMERSE the heated bed mats; allow them to dry
thoroughly before plugging them in for use.
ABS PLASTICS
Dust and wipe clean with soft, damp cloth or chamois, wiping gently. Do not use gritty or
abrasive particle soaps or scouring compound to clean ABS plastic. Avoid using “citrus”
or biodegradable cleaners which contain “D-Limonene” as they may damage plastic
materials.
WARNING
Be sure to read all instructions carefully before using the heated bed mats. YOUR
BEDDING SHOULD ALWAYS REMAIN FLAT, NEVER FOLDED,
ROLLED OR BUNCHED. EXCESSIVE HEATING MAY OCCUR FROM
MISUSE.
To Next Page
Loading...
Need help?
General
