Jazz HDV102 - Getting Started: Initial Setup; Battery and SD Card Installation

11
OK Button
Press to confirm MENU/ option settings
Press to START / STOP playing a video clip when Playback
mode has been selected.
Delete Button
With Playback mode selected; press DELETE Button to access
YES / NO delete options for selected Video clip or Still Photo.
Self-Timer
Indicator
Indicator blinks when the Self-Timer is activated and count
down is in process
Display Button
Pressing this button will sequentially change LCD display view
BASIC OPERATION - GETTING STARTED
Note: Your recorder requires batteries and SD/SDHC Memory Card inserted to operate. These
are not supplied and should be obtained separately. SD/SDHC memory card with capacity up
to 8GB may be used in your recorder.
1. Battery Installation
- The video recorder uses four AAA size alkaline batteries as power supply
- Slide / open the Battery Cover
- Insert batteries into the batteries compartment correctly, following the polarity markings
indicated next to the Battery compartment.
Before changing installed but exhausted batteries, first turn OFF the recorder.
2. SD/ SDHC Memory Card Installation
- With the Battery Cover opened, insert the SD/SDHC memory card into the Card Slot, press
card fully down until card is latched.
- Orient the card following the SD Card mark