46
7.
Declaration of Conformity
in terms of directive 2014/35/EU - low voltage directive
(Directive 2014/35/EU of the council from 26. February 2014 on the harmonisation of the laws of Member States relating to elec-
trical equipment designed for use within certain voltage limits)
in terms of directive 2014/30/EU - electromagnetic compatibility
(Directive 2014/30/EU of the council from 26. February 2014 on the approximation of the laws of the Member States relating to
electromagnetic compatibility)
The Manufacturer
declare that the product
JB-lighting Lichtanlagentechnik GmbH
Sallersteigweg 15
89134 Blaustein-Wippingen
Sparx7
is in agreement with the safety requirements of this directives. Following standards are contained in the evaluation
of the declaration of conformity:
Information technology equipment - Radio disturbance
characteristics - Limits and methods of measurements
Emission - requirements according
to: EN 55022:2010
Conducted emissions
EN 55022:2010
Radiated emissions
EN 55022:2010
Harmonic current emissions
EN 61000-3-2:2015
Flicker
EN 61000-3-3
Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurements
Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurements
Electromagnetic compatibility (EMC)
part 3-2: Limits - Limits for harmonic current emissions
(equipment input current < 16A per phase)
Electromagnetic compatibility (EMC)
part 3-3: Limits - Limitation of voltage changes, voltage uctuation and icker
in public low-voltage supply systems, for equipment with rated
current < 16 A per phase and not subjected to conditional connection
Immunity - Requirements according to Electromagnetic compatibility (EMC) - Part 6-2:
DIN EN 61000-6-2:2005
EN 61000-4-2:2009
EN 61000-4-3: 2006 + A1:2008 + A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2014
EN 61000-4-8:2010
EN 61000-4-11:2004
Generic standards - Immunity for industrial environments
Part 4-2: Testing and measurements techniques
Electrostatic discharge immunity test
Part 4-3: Testing and measurements techniques
Radiated, radio-frequency, electromagnetic eld immunity test
Part 4-4: Testing and measurements techniques
Electrical fast transient/burst immunity test
Part 4-5: Testing and measurements techniques
Surge immunity test
Part 4-6: Testing and measurements techniques
Immunity to conducted disturbances, induced by radio-frequency elds
Part 4-8: Testing and measurements techniques
Power frequency magnetic eld immunity test
Part 4-11: Testing and measurements techniques
Voltage dips, short interruptions and voltage variations immunity tests
Blaustein, 13.07.2013
_______________________
Jürgen Braungardt
Managing Director
To Next Page