Need help?Do you have a question about the JB-Lighting Varyscan 6 HMI 575 and is the answer not in the manual?
General| Brand | JB-Lighting |
|---|---|
| Model | Varyscan 6 HMI 575 |
| Category | Projector |
| Language | English |
Unpack and check all parts of the Varyscan® equipment for completeness and transport damage.
Procedure for safely inserting and replacing the projector's HMI bulb, with important warnings.
Instructions for powering on and starting the Varyscan® equipment after installation.
Guidelines for mounting the Varyscan® and connecting power and DMX cables.
Overview of the menu system for configuring projector functions and settings.
Setting up DMX mode, adjusting DMX address, and enabling DMX reset.
Inverting pan and tilt axis movement directions for optimal projector operation.
Adapting the Varyscan® to 8/16 bit DMX control systems.
Configuring the projector for standalone operation, including setting steps and editing sequences.
Instructions for changing metal and glass gobos, including sizes and specifications.
Guidance on diagnosing and repairing common defects in the projector.
Performing regular maintenance, including cleaning optical parts, ventilation, and lubricating gobos.
Information on DMX512 addressing and detailed occupation of channels for the Varyscan®.
Key technical data including weight, power consumption, voltage, and fuse details.
Procedure for changing the eproms on main boards and updating the projector software.
To Next Page