ENGLISH OPERATION MANUAL
JB SYSTEMS® 1/30 HIGH Q30D Mk2 TURNTABLE
OPERATION MANUAL
Thank you for buying this JB Systems product. To take full advantage of all possibilities,
please read these operating instructions very carefully.
FEATURES
• High Torque direct drive motor
• Fast start / stop
• 3 speeds: 33, 45, 78 rpm with quartz lock
• 2 Pitch adjustment ranges: +/-10% ; +/-20%
• Forward / reverse play
• Selectable phono/line output
• Retractable target light
• Audio Technica cartridge included
• All metal S-shaped tone arm assembly with:
• Counterweight
• Anti-skating adjustment
• Lever lift with height adjustment
• Adjustable large feet for perfect leveling
BEFORE USE
Check the contents:
Check that the carton contains the following items:
• Turntable platter
• Slip mat
• 45-rpm adapter
• Counterweight
• Head shell
• Operating instructions
• Cartridge
• Mains power cable.
ENGLISH OPERATION MANUAL
JB SYSTEMS® 2/30 HIGH Q30D Mk2 TURNTABLE
SAFETY INSTRUCTIONS:
CAUTION: To reduce the risk of electric shock,
do not remove any cover. No user-serviceable
parts inside. Refer servicing to qualified service
personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Do not
place metal objects or spill liquid inside the turntable. Electric shock or malfunction may
result.
INSTALLATION GUIDELINES:
• Install the turntable in a well-ventilated location where it will not be exposed to high
temperatures or humidity.
• Placing and using the turntable for long periods near heat-generating sources such as
amplifiers, spotlights, etc. will affect its performance.
• When the turntable is used in a loud-sound environment, for example near speakers,
sound skip and feedback may occur.
• Install the unit on a perfectly horizontal and very stable surface. A concrete or marble
surface is perfect. A wooden surface is a bad choice while it amplifies vibrations.
• Be sure the turntable, including its audio and mains cords, does not touch any vibrating
materials. Take special care when using the unit while it is installed in a carrying case.
CLEANING THE TURNTABLE:
Clean by wiping with a cloth slightly dipped with water. Avoid getting water inside the unit.
Do not use volatile liquids such as benzene or thinner which will damage the unit.
CAUTION
To Next Page
Loading...
Need help?
General