JB Systems iMove 5S - User Manual

Version: 1.0
WWW.BEGLEC.COM
Copyright © 2006-2007 by BEGLEC cva.
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
Operation Manual
Mode d'emploi
Gebruiksaanwijzing
Bedienungsanleitung
Manual de instrucciones
Manual do utilizador
EN
FR
NL
DU
ES
PT

Summary

Operation Manual Overview

Product Features

Lists key capabilities including DMX channels, optics, gobos, colors, and built-in programs.

Preparation Before Use

Guides users on checking for transportation damage and reading safety instructions before initial operation.

Essential Safety Instructions

Provides critical warnings regarding electric shock, environmental considerations, moisture, and proper handling.

Lamp Replacement Procedures

HID Version Lamp Replacement

Step-by-step instructions for replacing the lamp specifically in the HID version of the unit.

ELC Version Lamp Replacement

Step-by-step instructions for replacing the lamp specifically in the ELC version of the unit.

Overhead Rigging Guidelines

Rigging Safety and Precautions

Details on safe installation practices, load limits, and regular inspections for overhead rigging.

Unit Setup and Control Functions

Control Panel Overview

Explains the function of the display, LEDs, buttons, and DMX ports on the unit's control panel.

Main Menu Navigation

Details the main menu options for setting modes, colors, effects, and other unit parameters.

DMX Addressing Setup

Instructions on how to set the starting DMX address for the unit in a DMX setup.

Show Mode Selection

Describes the different built-in show modes for standalone or master/slave operation.

Slave Mode Configuration

Explains how to configure slave units for synchronized or opposite operation with a master unit.

Blackout Mode Settings

Configuration options for the unit's behavior when the DMX signal is lost.

Color Mode Options

Settings for selecting single color output or split color combinations.

Pan and Tilt Inversion

Settings to invert the pan and tilt movement directions of the unit.

Display and LED Settings

Options for display orientation, backlight behavior, and LED indicators.

Focus Adjustment Procedure

Procedure for adjusting the focus of the light beam and gobos for optimal clarity.

Self-Test and Reset Functions

How to run internal diagnostics and reset the unit to its default factory settings.

Fixture Operating Hours

Displays the total number of operating hours the unit has accumulated.

DMX Connectivity and Configuration

DMX Protocol Explanation

Overview of the DMX protocol and requirements for connecting light effects using XLR cables.

DMX Channel Configuration

Detailed breakdown of DMX channels and their specific functions for the iMove 5S.

Setting the Right Starting Address

Guidance on setting the correct DMX starting address for multi-unit setups.

Operating Modes

Master;Slave Operation

Instructions for setting up units in master/slave mode for synchronized light shows.

Easy Controller Operation

How to use the optional CA-8 easy controller for basic functions and modes.

Maintenance and Cleaning

General Maintenance Checks

Checks for screw tightness, housing integrity, and mains cable condition.

Cleaning Optical Components

Guidelines for cleaning internal and external lenses and mirrors for optimal light output.

JB Systems iMove 5S Specifications