JB Systems MX4 Mk2 User Manual

Operation Manual
Mode d'emploi
Gebruiksaanwijzing
Bedienungsanleitung
Manual de instrucciones
Version: 1.0 The Power Source for DJ’s
WWW.BEGLEC.COM
Copyright © 2004 by BEGLEC cva.
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.

JB Systems MX4 Mk2 Specifications

General

Channels	4
EQ	3-band EQ per channel
Faders	60mm faders
Weight	3.5 kg
Dimensions	320 x 270 x 80 mm
USB Interface	No
Phantom Power	Yes

Summary

Operation Manual

Safety Instructions

General Safety Warnings

Important warnings regarding electric shock, moisture, and proper maintenance.

Installation Guidelines

Connections

Controls and Functions

DJ Mic Input Jack

Unbalanced microphone input with XLR connector, also has a 1/4" mono jack.

Input Source Selector

Selects the correct input for each channel (Phono, line, aux, mic).

Gain Level

Adjusts the input level for each channel to aim for OdB on the VU-meter.

3-Band Tone Controls

Controls frequency response per channel from -26dB to +12dB, flat in center.

Talkover

PFL Selector

Channel Fader

Crossfader Assign

Crossfader

Mixes between selected channels; integrates optical fader starts.

Fader Start On/Off Switch

Master1 VU Meters

PFL VU Meters

Cue Level

Cue Mix

Mixes master output and selected channels in headphones for preview.

Headphone Jack

Master1 Level

Balance Master1

Master2 Level

Rear Panel Connections

Fader Control

Mains Cable

Connects the unit to a 230V/50Hz mains outlet for power.

Master1 Balanced Output

XLR connectors for connecting to balanced amplifier inputs.

Master Unbalanced Outputs

Unbalanced outputs (Master1 and Master2) for connecting unbalanced amplifiers.

Record Output

Input Channels

Phono/CD Switch

Specifications