ENGLISH OPERATION MANUAL
JB SYSTEMS® 14/89 SM-1612 SCANMASTER
The display shows “TRANSMIT” to indicate that the SM-1612 is ready to send.
2. Prepare to receive file dump: these actions have to be carried out on the
Scanmaster that has will receive the file dump.
a. Turn the power off.
b. Press the following buttons at the same time and hold down while you turn on
the power:
Fixture8 button
Fixture9 button
Scene2 button
The display shows “RECEIVE” to indicate that the SM-1612 is ready to receive.
3. Start sending file dump:
On the Scanmaster showing “TRANSMIT” on its display, press the scene buttons 7
and 8 at the same time.
The display shows a small progression bar. Don’t touch both Scanmasters during
this operation. At the end of the operation both units will automatically return to
normal.
Before you start using the unit that received the file dump, switch it off and on!
MAINTENANCE
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water
inside the unit. Do not use volatile liquids such as benzene or thinner which will
damage the unit.
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the
current European and national guidelines. Conformity has been established and the
relevant statements and documents have been deposited by the manufacturer.
Power Input: DC 9 ~ 12V 300mA minimum.
AC/DC Power adapter: AC 240V, 50Hz 12Vdc / 300mA
DMX outputs: 3pin XLR; DMX, channels 001 192
Midi input: 5pin Din
Audio input: Cinch 0.1V ~ 1Vpp
Size: 48.3 x 13.4 x 8.5cm (19” / 3U)
Weight: 2.7kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website:
www.jb-systems.eu
To Next Page
Loading...
Need help?
General
