EasyManua.ls Logo

JBI Wire-O WOB3500 MK2 User Manual

JBI Wire-O WOB3500 MK2
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ALPHA/OM/1 © JBI 2000
67 Rue du Docteur Blaizot
BP 134
61304 L’Aigle Cedex
France
Tel: +33 (0)2 33 842150
Fax: +33 (0)2 33 842151
JBI James Burn Int.
®
®
®
Binding Machine
Wire-O
®
, Lhermite
®
and
UniCoil
®
are registered
Trademarks of
James Burn International
Patent Pending
Operating
Instructions
(Modèle WOB3500 MK2)
Version : 200-240Vac 50/60Hz Single phase
Issue : 2
Serial number WOB2.211 onwards
(starting January 2009)
To: Installation Agent
After installing this machine, always
leave this manual on the machine
.
Question and Answer IconNeed help?

Do you have a question about the JBI Wire-O WOB3500 MK2 and is the answer not in the manual?

JBI Wire-O WOB3500 MK2 Specifications

General IconGeneral
TypeWire-O Binding Machine
Throat DepthAdjustable
Punching Capacity20 sheets (80 gsm)
Pitch3:1
Number of Dies34 dies

Summary

Using Your Binding Machine Safely

Safety Information and Symbols

Learn to recognise safety information, and always follow recommended precautions and safe operating practices.

Safety Warning Signs

This section lists the safety warnings that you should be familiar with before you install or operate your binding machine.

Key Safety Instructions

DO NOT OPERATE THE BINDING MACHINE IF THE GUARDS ARE NOT IN PLACE. All guards MUST be in place before you start the binding machine.

Safety Precautions and Handling

Guidelines for safely handling heavy equipment, wearing appropriate clothing, and protecting children.

Label Maintenance and Emergency Preparedness

Instructions for maintaining safety labels, preparing for emergencies, and employer responsibilities.

Installation of Your Binding Machine

Choosing a Location for Your Machine

Select a solid, level, and rigid site within the office for accurate alignment and efficient workflow.

Technical Data of Your Binding Machine

How to Select the Correct Size of Wire-O®

Running Your Binding Machine

Initial Screen and Wire Selection

Navigating the initial screen to select spool options and wire size for operation.

Loading a Spool of Wire-O®

Step-by-step guide on how to properly load a spool of Wire-O onto the machine.

Skip Bind Option: Hanger Unit

Skip Bind Option: Hanger Spool Feeding

Maintaining Your Binding Machine

Fault Finding Chart and Error Messages

Troubleshooting Common Faults

Table listing common faults, their causes, and suggested remedies for the binding machine.

Binding Machine Technical Specifications

Product Warranty Information

Related product manuals