ERROR READINGS
The TRUE TEMP digital heater controller contains an advanced micro-
processor that will visually alert you when there is a malfunction.
Please see the Error Readings below:
LO: The current temperature read out is below 0.0F
H1: The current temperature read out is higher than 99.9F
ER1: Temperature Probe Malfunction/Poor Contact
ER2: Controller Malfunction
If you require further support or have questions, please contact us at:
Customer Support: (877) 374-9981
Or email us at support@jbjlighting.com
Or visit our website for any updates on your product.
Web Address: www.jbjlighting.com
Please call or email us for any warranty related concerns:
TransWorld Aquatic Enterprises, Inc.
3730 W. Century Blvd # 3
Inglewood, CA 90303
Note: TRUETEMP digital heater controller is NOT waterproof. Please place in
a well ventilated moisture free environment.
CUSTOMER SUPPORT
12
To Next Page
Loading...