EasyManua.ls Logo

JBL COACH E40BT - Read More About This Manual & Download PDF:

JBL COACH E40BT
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 1: Pair and connect the headphone to a source device.
Step 2: Pause music or disengage voice calls from the source device.
Step 3: Press ShareMe™ button once on the first headphone then LED
behind the button starts blinking. This headphone is ready to
connect to the second headphone.
Step 4: Press ShareMe™ button twice on the second headphone then
LED behind the button starts blinking. LED stops blinking after
ShareMe™ connects. Play the music on the source device.
Two headphones are ready to share the music.
Press ShareMe™ button once to disconnect.
ShareMe™ connection ends in 10 minutes when no audio is
streaming from a device.
Quick Start Guide
EN
Advanced 40mm drivers
Dynamic frequency response: 20-20kHz
BT frequency range: 2.402-2.480GHz
BT transmitter power: <4dBm
BT transmitter modulation:
GFSK /4 DQPSK 8-DPSK
Support BT 3.0, A2DP v1.3, AVRCP v1.5,
HFP v1.6, HSP v1.2
Maximum SPL: 115dB @ 30mW
Rated power input: 30mW
Microphone sensitivity:
-42dBV/Pa @ 1kHz
Battery type: Lithium polymer
(3.7V,610mAh)
Music playing time: 16 hours
Talk time: 24 hours
Read More About This Manual & Download PDF:
JBL E40BT COACH Limited Edition Manual – Optimized PDF
JBL E40BT COACH Limited Edition Manual – Original PDF

Related product manuals