To Next PageTo Next Page
Need help?Do you have a question about the JBL CRISTAL PROFI e1502 greenline and is the answer not in the manual?
Check all parts for damage/missing items; rinse filter media thoroughly.
Connect hoses to the connection block and pump head, ensuring proper seal.
Position the filter correctly in its intended location, considering height and orientation.
Connect intake strainer, water outlet pipe, angle piece, and spray bar securely.
Ensure stopcock levers are OPEN, press start button until filter fills with water.
Adjust water flow with the OUT stopcock lever; avoid reducing capacity by more than half.
Disconnect power, clean filter media in lukewarm water, and replace when necessary.
Disassemble, clean impeller, shaft, and casing, then reassemble carefully.
Check all parts for damage/missing items; rinse filter media thoroughly.
Connect hoses to the connection block and pump head, ensuring proper seal.
Position the filter correctly in its intended location, considering height and orientation.
Connect intake strainer, water outlet pipe, angle piece, and spray bar securely.
Ensure stopcock levers are OPEN, press start button until filter fills with water.
Adjust water flow with the OUT stopcock lever; avoid reducing capacity by more than half.
Disconnect power, clean filter media in lukewarm water, and replace when necessary.
Disassemble, clean impeller, shaft, and casing, then reassemble carefully.
General| Filter type | External filter |
|---|---|
| Flow rate | 1400 l/h |
| For aquariums up to | 600 l |
| Power consumption | 20 W |
| Filter volume | 12 l |
