To Next PageTo Next Page
Need help?Do you have a question about the JBL CRISTAL PROFI e1902 greenline and is the answer not in the manual?
Carefully remove filter and accessories, check for completeness and damage.
Connect hose connection block and hoses to the pump head and filter.
Attach intake strainer, water outlet pipe, angle piece, and spray bar.
Prime the filter and connect to power supply to begin operation.
Disconnect power, clean filter media in lukewarm water, avoid washing all at once.
Remove and clean impeller casing, impeller, and shaft. Never dip pump head in water.
Solutions for power issues, priming, impeller problems, or blockages.
Resolve low flow by checking levers, blockages, and filter media condition.
Carefully remove filter and accessories, check for completeness and damage.
Connect hose connection block and hoses to the pump head and filter.
Attach intake strainer, water outlet pipe, angle piece, and spray bar.
Prime the filter and connect to power supply to begin operation.
Disconnect power, clean filter media in lukewarm water, avoid washing all at once.
Remove and clean impeller casing, impeller, and shaft. Never dip pump head in water.
Solutions for power issues, priming, impeller problems, or blockages.
Resolve low flow by checking levers, blockages, and filter media condition.
General| Type | External filter |
|---|---|
| Max Flow Rate | 1900 L/h |
| Output | 1900 L/h |
| Max Tank Volume | 800 l |
| Power Consumption | 36 W |
| Hose size | 16/22 mm |
| Suitable for aquariums with a volume of | 300-800 l |
| Filter Media | Biological and mechanical filter media included |
| Warranty | 4 years (upon registration) |
