SUBWOOFER CONTROLS
Rear Panel
PHASE
CS80SUB
¡
™
£
¢
∞
§
FUSE
T 2.5A L 250V
120V–60Hz
200Watts
1
Subwoofer-Level Control
2
Phase Switch
3
LFE Input
4
Line-Level Inputs
5
Power Indicator LED
6
Power Switch
Subwoofer Connections
If you have a Dolby
®
Digital or DTS
®
receiver/processor with
a low-frequency-effects (LFE) or subwoofer output:
TSS-Sub800/230
SUBWOOFER OR
L
FE OUTPUT
R
ECEIVER/PROCESSOR
15' (4.5m)
Subwoofer
cable included
If your receiver/processor does not contain a Dolby Digital or DTS
processor but has a subwoofer output:
NOTE
: If your receiver/processor has only one sub out, you may use
either the L or R input.
15' (4.5m)
Subwoofer cable
included
TSS-Sub800/230
RECEIVER/PROCESSOR
Important!
Whenever changing cables, pulling plugs, etc., ALWAYS TURN OFF ALL
EQUIPMENT, including the subwoofer.
CS 480-120V om.qxd 12/15/06 4:43 PM Page 10
CS80 (CS480 Subwoofer)
To Next Page
Loading...
