To Next PageTo Next Page
Need help?Do you have a question about the JBL D38 and is the answer not in the manual?
Specifies the speaker's electrical resistance under normal operating conditions.
Indicates the maximum power handling capacity of the speaker.
Defines the range of audio frequencies the speaker can reproduce.
Measures the speaker's efficiency in converting power to sound output.
The frequencies at which the signal is divided among different speaker drivers.
Details of the 8" (381mm) paper cone woofer, including part number and DC resistance.
Details of the 4" (101mm) paper cone midrange driver, including part number and DC resistance.
Details of the 2" (51mm) paper cone tweeter, including part number and DC resistance.
Part number for the crossover network used in the system.
Test specification for the entire speaker system's frequency response.
Test specification for the low-frequency driver's frequency response.
Test specification for the mid-frequency driver's frequency response.
Test specification for the high-frequency driver's frequency response.
Provides the height, width, and depth of the speaker enclosure in inches and millimeters.
Specifies the weight of the speaker in pounds and kilograms.
Lists the Owner's Manual, Warranty Card, and Survey Card included in the packaging.
Identifies foam corners, plastic bag, and outer carton used for product packaging.
Illustrates the wiring connections for the High, Mid, and Low Frequency transducers.
Shows the input terminals and their associated wiring to the crossover network.
Diagram showing all speaker components with their part numbers and mounting hardware.
Lists specific screws and retainers used for assembling the speaker components.
Specifies the speaker's electrical resistance under normal operating conditions.
Indicates the maximum power handling capacity of the speaker.
Defines the range of audio frequencies the speaker can reproduce.
Measures the speaker's efficiency in converting power to sound output.
The frequencies at which the signal is divided among different speaker drivers.
Details of the 8" (381mm) paper cone woofer, including part number and DC resistance.
Details of the 4" (101mm) paper cone midrange driver, including part number and DC resistance.
Details of the 2" (51mm) paper cone tweeter, including part number and DC resistance.
Part number for the crossover network used in the system.
Test specification for the entire speaker system's frequency response.
Test specification for the low-frequency driver's frequency response.
Test specification for the mid-frequency driver's frequency response.
Test specification for the high-frequency driver's frequency response.
Provides the height, width, and depth of the speaker enclosure in inches and millimeters.
Specifies the weight of the speaker in pounds and kilograms.
Lists the Owner's Manual, Warranty Card, and Survey Card included in the packaging.
Identifies foam corners, plastic bag, and outer carton used for product packaging.
Illustrates the wiring connections for the High, Mid, and Low Frequency transducers.
Shows the input terminals and their associated wiring to the crossover network.
Diagram showing all speaker components with their part numbers and mounting hardware.
Lists specific screws and retainers used for assembling the speaker components.
General| Frequency Response | 45 Hz - 20 kHz |
|---|---|
| Impedance | 8 Ohms |
| Woofer | 8 inch |
| Tweeter | 1-inch |
| Type | 2-Way Speaker |
