EasyManua.ls Logo

JBL FLIP4 - LED Indicators and Waterproofing

JBL FLIP4
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8. Warning
JBL Flip 4 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Flip is waterproof, please remove all cable connections and
tightly close the cap; exposing the JBL Flip 4 to liquids without doing so may result in permanent
damage to the speaker. And do not expose JBL Flip 4 to water while charging, as doing so may result
in permanent damage to the speaker or power source.
IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.
Specification:
Bluetooth version: 4.2
Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
Transducer: 2 x 40mm
Output power: 2 x 8W
Frequency response: 70Hz – 20KHz
Signal-to-noise ratio: 80dB
Battery type: Lithium-ion polymer (3.7V, 3000mAh)
Battery Charge time: 3.5 hour @ 5V1A
Music playing rime: up to 12 hours (varies by volume level and audio content)
Bluetooth transmitter power: 0 – 9dBm
Bluetooth transmitter frequency range: 2.402 – 2.480 GHz
Bluetooth transmitter: modulation: GFSK, 4-DQPSK, 8DPSK
Dimensions (H x W x D): 68 x 175 x 70 (mm)
Weight: 515g
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

Other manuals for JBL FLIP4

Related product manuals