Need help?Do you have a question about the JBL gto 601.1 II and is the answer not in the manual?
General| THD | < 1% |
|---|---|
| Input Sensitivity | 200 mV - 4 V |
| Fuse Rating | 30 A |
| RMS Power @ 4 Ohms | 300 Watts |
| RMS Power @ 2 Ohms | 600W |
| Frequency Response | 10Hz – 300Hz |
| Crossover Frequency | 50Hz - 150Hz |
| Bass Boost | 0 dB - 12 dB |
| Power Output | 600W |
| Low Pass Crossover | 50Hz - 150Hz |
Important safety precautions and advice for tool usage and electrical system disconnection before installation.
Guidance on selecting a suitable mounting spot, ensuring proper cooling and avoiding interference with vehicle parts.
Detailed instructions for making secure and reliable electrical connections, including ground and power leads.
Instructions for connecting speakers, recommending a minimum wire gauge for optimal performance.
Information on using speaker-level inputs for units without RCA line outputs, including connections for specific models.
A table specifying the minimum recommended wire gauge based on amplifier model and current draw for safe operation.
Important notes for installing optional accessories like neon tubes before making electrical connections.
Guide on setting crossover modes (FLAT, HP, LP) and adjusting frequency for optimal speaker performance and system volume.
Procedure for adjusting input level controls to prevent distortion and ensure optimal signal matching with the source unit.
Information on connecting and installing an optional remote level control for adjusting amplifier input level from the listening position.
How to use the bass boost control to enhance low-frequency output at 50Hz up to 12dB.
Details on using full-range AUX outputs to connect additional amplifiers, passing line-level signals.
Step-by-step instructions for physically installing optional neon tubes onto the amplifier, including securing and routing cables.
Defines who is covered by the warranty, specifying conditions like original purchase location and proof of purchase.
Outlines what damages and issues are covered by the warranty and lists exclusions like accident, misuse, or unauthorized repairs.
Clarifies that JBL covers labor and material costs for warrantable defects, provided conditions are met.
Provides instructions on how to get warranty service, including contacting dealers, authorized centers, or JBL directly.
States that implied warranties, including fitness and merchantability, are limited to the duration of the express warranty period.
Disclaims JBL's responsibility for indirect or consequential damages, limiting liability to repair or replacement of the defective product.
To Next Page
