Need help?Do you have a question about the JBL gto 755.6 II and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| RMS Power @ 4 Ohms | 75 Watts x 6 |
| RMS Power @ 2 Ohms | 100 Watts x 6 |
| Bridged RMS Power @ 4 Ohms | 200 Watts x 3 |
| Input Voltage | 14.4 V |
| Bass Boost Frequency | 45 Hz |
| Frequency Response | 10Hz |
| Crossover Frequency | 50 Hz |
| Bass Boost | 0 - 12 dB |
| Fuse Rating | 30 A |
| Input Sensitivity | 4 V |
| Crossover | High Pass/Low Pass |
General safety precautions and practical advice for installing the amplifier.
Guidance on selecting a suitable mounting spot and securing the amplifier unit.
Instructions for connecting the amplifier's power supply and ground.
How to properly connect speaker wires to the amplifier output terminals.
Details on using speaker-level inputs for connecting to head units without RCA outputs.
Diagrams for connecting GTO subwoofer amplifiers with one or two woofers.
Diagram for setting up the GTO75.2 II amplifier for stereo mode.
Diagram for setting up the GTO75.2 II amplifier for bridged-mono mode.
Wiring for driving front and rear speakers in stereo mode.
Configuration for driving full-range speakers and a subwoofer.
Setup for driving components or subwoofers using bridged channels.
Explanation of INT and EXT modes for subwoofer signal input.
Wiring for driving front/rear speakers and subwoofers in 6-channel mode.
Setup for 5-channel mode, bridging subwoofer output for more power.
Configuration for 3-channel mode, bridging channels for subwoofer and speakers.
How to adjust crossover frequency and mode for optimal speaker performance.
Procedure for adjusting input level to match source unit and avoid distortion.
Instructions for installing and using an optional remote level control module.
Guide to adjusting the bass boost feature for enhanced low-frequency output.
Information on using full-range AUX outputs to connect additional amplifiers.
Step-by-step instructions for optionally installing neon tubes for aesthetic purposes.
Diagnosing and resolving problems related to the amplifier not producing sound.
Addressing distorted audio or lack of "punch" in sound output.
Technical details for GTO301.1, GTO601.1, GTO1201.1 models.
Technical details for the GTO75.2 II amplifier model.
Technical details for the GTO75.4 II amplifier model.
Technical details for the GTO755.6 II amplifier model.
Visual guides for wiring subwoofers to the GTO subwoofer amplifiers.
Wiring configurations for the GTO75.2 II amplifier.
Wiring configurations for the GTO75.4 II amplifier.
Wiring configurations for the GTO755.6 II amplifier.
Defines who is covered by the warranty and the conditions for protection.
Outlines what is covered and what is excluded from the warranty.
Specifies who is responsible for labor and material costs during the warranty period.
Instructions on how to contact JBL or authorized centers for warranty repairs.
Discusses limitations on implied warranties, such as merchantability and fitness for purpose.
Clarifies JBL's liability regarding incidental or consequential damages.
To Next Page
