ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 4 ohms
• Max Amp Power: 300 watts*
(2 x 300 for bi-amp)
• Frequency Response: 35Hz-20kHz (-6dB)
48Hz-18kHz (+/-2.5dB)
• Sensitivity: 95dB
• Crossover Frequency: 800Hz
SYSTEM COMPONENTS:
• Cabinet: K2.S5500 (Not for Sale)
• Grille: G5500
• Lower frequency (2) LE125S, Combination fiber-
glass/Aquaplas diaphragm with
300mm (12inch) diecast
aluminum chassis, Shielded
74878 (LE125S-12).
DC Resistance: 8 ohms ±10%
• High frequency 275Nd compression driver with
titanium diaphragm, Shielded
73988.
DC Resistance: 3.2 ohms ±10%
• Crossover Network:
Network, L.F. 74713-02
Network, H.F. 74713-01 or 71918
PARTS LIST
WIRING DIAGRAM
K2.S5500
HORN 75015
BATTERY COVER 75033
PORT TUBE 70515-03
GRILLE CUP (8) 72546
LOGO, JBL 74714
GASKET, WOOFER 74062
OWNERS MANUAL 75075
CARTON 75296
TOP END PAD 75298
BOTTOM END PAD 75299
SPACER SCREW 71885
BASE SPACER WHEEL 71880
WOOFER CONE KIT C12RLE125
BATTERY HOLDER 12BH610
BINDING POST SET 90031-C
BINDING POST (BLK) SCT-CLB35-B
BINDING POST (RED) SCT-CLB35-R
DESCRIPTION
PART NO.
• Enclosure dimensions: (12.51mm x 499mm x 410mm)
49-1/4”h x 19-5/8”w x 16-1/8”d
• Weight: 210 lb (95 kg)
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test 6.0V Input 30 Hz to 20 kHz
• L.F. Aural Sweep Test 5.0V Input 30 Hz to 1 kHz
• H.F. Aural Sweep Test 2.83V Input 500Hz to 20 kHz
WARRANTY:
• Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will
ensure proper system headroom to allow for occasional
peaks. We do not recommend sustained operation at these
maximum power levels.
Transducer(s):
Transducer:
To Next Page
Need help?
General
