Need help?Do you have a question about the JBL L100 Classic and is the answer not in the manual?
General| Type | 3-way bookshelf loudspeaker |
|---|---|
| Sensitivity | 90dB (2.83V/1m) |
| Crossover Frequencies | 450Hz, 3.5kHz |
| Enclosure Type | Bass-reflex via front-firing port |
| Woofer | 12-inch (300mm) pure pulp cone |
| Midrange | 5-inch (125mm) pure pulp cone |
| Tweeter | 1-inch (25mm) titanium dome with waveguide |
| Frequency Response | 40Hz - 40kHz |
| Controls | High-frequency level control |
| Finish | Walnut wood veneer |
| Nominal Impedance | 4 ohms |
| Weight | 58.5 lbs (26.5 kg) |
| Recommended Amplifier Power | 25 - 200W RMS |
Lists the items included in the JBL L100 Classic package.
Guidelines for optimal speaker placement, including spacing and orientation.
Instructions for connecting amplifier to speaker using the basic single-wire method.
How to connect bare wire or pin connectors to speaker terminals safely.
How to connect spade connectors to speaker terminals safely.
How to connect banana connectors to speaker terminals safely.
Recommendations for cleaning and maintaining the speaker cabinet and grilles.
Detailed technical specifications and measurements of the JBL L100 Classic.
To Next Page
